Restart Ado Provider

[Thijs4321]

Hi,

Basically i have a "connection lost" problem. I have browsed through some post but could not really find what i needed.

It works for 30+ days then al of the sudden connection lost.
Nothing in the NexusException log.
THe Shared memory and TCP are still working.

nexusdb : 3.11
Nexus Runtime Installer : 2.0.7.104

when i stop and start the nxserver everything works. But the TCP + shared memory is working just fine, so i dont what to stop and start because other programs using that are critical.

So is there a way to reset the ado connection without resetting nxserver shared memory.

> So is there a way to reset the ado connection without resetting
> nxserver shared memory.

If you are using the "Native" transport on the .NET provider side, then
you can disable and enable that separately on the nxServer side; see
the ADO/.NET Connector page in the server configuration.

--
Eivind Bakkestuen [NDD]

[Thijs4321]

Thanks for the response.

I will take a look at it, i was hoping it was possible using command line.
But maybe this can do the trick after we enable the web ui.

Thanks